Skip to content
modualmodualSeries Pro AC

Mechanical installation

Handling

Section titled “Handling”

The storage unit must only be lifted and transported from the front with a pallet truck.

Pallet truck entering from the front Pro 70 on a pallet truck

Condition Width Depth Height
As delivered 1200 mm 700 mm 1700 mm

Dimensions of the Pro 70 as delivered

Installing the battery packs

Section titled “Installing the battery packs”

  1. Remove the strapping and the protective film from the storage unit.

  2. Move the storage unit to the desired position with a pallet truck.

    Moving the storage unit with a pallet truck

  3. Remove the transport frame by loosening the 8 screws.

    Screws of the transport frame

  4. Position the storage unit as required and level it, using shims if necessary.

    Levelling the storage unit

  5. Fix the storage unit to the floor with M8 bolt anchors, using at least three of the four fixing holes.

    Fixing holes (red) and bolt anchors (blue)

Installing the inverters

Section titled “Installing the inverters”
  • Inverters on the pack (left or right): hang the inverters on the brackets and secure them with the supplied locking screw, as described in the Solis user manual. Mount the master (70-1) in the upper position and the slave (70-2) in the lower position.
  • Inverters on the wall: install the inverters according to the Solis installation instructions.

Continue with the electrical connections.